dbx 131s Single 31-Band Constant Q Graphic EQ - Nearly New

prev next

View PDF

NEARLY NEW

Buy this New for 1 999 kr >

Key Features

Carefully designed and constructed EQ gets the best from your sound
31-band channels of 1/3 octave equalizations offers great control over your sound
Bypass switch allows for quick referencing and monitoring
LED ladders help you monitor output levels

Questions? Email [email protected] or call 08-124 103 60

dbx 131s Single 31-Band Constant Q Graphic EQ - Nearly New Overview

View this description in Swedish

A lineage of great outboard gear informs the design of this fantastic studio tool. The dbx 131s Single 31-Band Constant Q Graphic EQ operates as your central EQing unit in your studio or on stage. Once installed, take immediate advantage of its exceptional sound shaping capabilities.

Equalization takes your music and sound installations from good to great. This signal processor is a must have for the serious producer or the hard-working live sound engineer.

Nearly New: This product may have been opened for quality control purposes, returned by a customer, refurbished, or may have non-essential parts or software missing. Otherwise, the product operates as new. This is a great opportunity to buy a fully functioning product at a discounted price.

Product Ref: 172336

Full Description

View Full Description

Streamlined - incredibly deep

Through its 31 bands of audio EQ you can shape your sound exactly how you want with total ease. Allowing you to boost/cut in range of 6 to 12 - it's got plenty of scope to attenuate frequencies you don't want and boosts ones you do. No matter how demanding the job, the dbx 131s can handle it. All without breaking the bank

Stuffed full of features

Alongside the 31-band EQ there is a front panel bypass switch to help you reference the pre-EQ sound during mixdown. 4-segment LED for monitoring output levels help you deal with levels at higher levels. Fully compatible with XLR and TRS inputs and outputs - it's ready for any situation.

Features

Single 31-band, 1/3-octave Constant Q frequency bands
Switchable boost/cut ranges of ±6 or ±12dB
12dB per octave, 3dB down @ 50Hz low-cut filter
Front panel bypass switch
±12 dB input gain range
4-segment LED ladders for monitoring output levels
XLR and TRS Inputs and Outputs
Frequency Response of less than 10Hz to more than 50kHz
Dynamic range of greater than 108dB

Specifications

Input Connectors: 1/4" TRS, female XLR (pin 2 hot)
Input Type: Electronically balanced/unbalanced, RF filtered
Input Impedance: Balanced 40k ohm, unbalanced 20k ohm
Max Input: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
Output Connectors: 1/4" TRS, male XLR (pin 2 hot)
Output Type: Impedance-balanced/unbalanced, RF filtered
Output Impedance: Balanced 100 ohm, unbalanced 50 ohm
Max Output: >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth: 20Hz to 20kHz, +0.5/-1dB
Frequency Response: <10Hz to >50kHz, +0.5/-3dB
Dynamic Range: Typically >112dB
Signal to Noise Ratio: Typically >95dB
THD+Noise: <0.003
Interchannel Crosstalk: <-90dB, 20Hz to 20kHz
Bypass Switch: Bypasses the graphic equalizer section in the signal path
Low cut Switch: Activates the 50Hz 12dB/octave high-pass filter
Range Switch: Selects either +/- 6dB or +/-12dB slider boost/cut range
Operating Voltage: 100-240VAC 50/60Hz
Power Consumption: 15W
Power Connector: IEC receptacle
Unit Weight: 4.8 lbs.(2.2 kg)
Shipping Weight: 6.2 lbs.(2.8kg)
Dimensions: 1.75" (4.4cm) H x 6"(15.24cm) D x 19" (48.26cm) W

| Reviews of our service

Oops! There was an error retrieving our TrustPilot reviews. Please, try again later.