Full Description
View Full Description
An instant classic
Rotary mixers are a throwback to the early days of DJing, when they were used by DJs to craft smooth blends with their records. Introducing the Headliner R2, a two-channel rotary mixer, equipped with a vintage design, modern functionality, and powerful inner components. Providing a warm analog sound and an elegant set of controls, the Headliner R2 is one of the best in its class.
The Headliner R2 features ergonomic pots that control high quality ALPS Potentiometers and spring loaded push buttons that provide access to different functions, and the intricately designed circuitry ensures all audio signals that are fed through the mixer retain the utmost purity. Both channels have two stereo RCA inputs, one line and one phono that you can switch between with push buttons at the top of the control panel.
Retro controls
Each channel has a three band EQ that you can use to cut out or boost certain frequencies when you're blending your tracks, with total isolation when fully turned down and up to a +9dB boost when turned up. A main volume dial on each channel is used to bring your tracks to full volume on the master, and you can further attenuate the volume of tracks with a gain control above the EQ, for when you have an overtly loud song or one that’s too quiet. The main output control bus also features independent gain controls for the master and the booth separately. Within the cue control bus, you can adjust the volume of your headphones, choose how much of the master output you can hear alongside the cued track, and you can use a spring-loaded push button to split the cue.
Ultimate utility
Additionally, the R2 also has an analog filter with a sweep knob and a resonance control, you can assign this to either channel independently, or at the same time with the two spring-loaded push buttons underneath each channels controls. This filter offers you a dynamic analog effect to apply to your tracks to isolate and highlight certain frequencies, giving your transitions a smooth yet powerful edge. To plug your microphone into the mixer, there is a Combi XLR/TRS input with a dedicated mic volume attenuator.
Two LED volume unit meters allow you to visually monitor the volume of each channel, so you can prevent clipping and feedback. Headphones with both 3.5mm and 1/4inch TRS Jacks can be connected thanks to two different sized headphone outputs on the front of the mixer. With an array of output choices, the Headliner R2 master output and booth output both have stereo RC and XLR outputs, and the mixer also features an independent stereo RCA output for recording. The record output is not affected by the master or booth controls, so that you can turn the volume up and down without affecting your recording volume. Powered by a DC in Mini XLR cable, the Headliner R2 is incredibly easy to set up. This is an ideal rotary mixer for any professional or beginner DJ.
Features
- Two channel rotary mixer suitable for both beginners and professionals
- Each channel features a three-band isolator EQ with up to +9dB of gain
- Ergonomic rotary pots give you smooth control over the mixer parameters
- Independent master and booth outputs with dedicated volume controls
- Combi XLR/TRS input for microphones with dedicated gain attenuator
- Analog filter with full frequency range sweep and resonance control
- Filter can be assigned to each channel independently or concurrently
- LED VU meter provides visual volume information to prevent clipping
- Independent record output not affected by master or booth controls
Specifications
Microphone Input:
-50dBu
Frequency Response: 20Hz – 20kHz (+/- 0.1dB)
THD + N: < 0.1
Input Impedance: 1.2 kOhm
Line Inputs:
- Nominal Input Level: -10dBV (-7.8dBu)
- Gain Range: -12dB to +12dB
- Frequency Response: 20Hz – 20kHz (+0/- 0.5dB)
- THD + N: < 0.05
- Input Impedance: 10 kOhm
Phono Inputs:
- Nominal Input Level: -40dBu (@1kHz)
- Gain Range: -12dB to +12dB
- Frequency Response: RIAA
- THD + N: < 0.05
- Input Impedance: 47 kOhm
Main Outputs:
- Nominal Output Levels, balanced: +4dBu
- Maximum Output Level, balanced: +20dBu
- Nominal Output Levels, unbalanced: -10dBV (-7.8dBu)
- Maximum Output Level, unbalanced: +12dBu
- Frequency Response: 20Hz-20kHz (+0/-1.5dB)
- Residual noise: <-86dBu (Line to Master)(A-Weighted)
- Dynamic Range: > 100dB (A-Weighted)
- Crosstalk: < -65dB
- THD + N: < 0.05
Headphone Output:
- Maximum Output Level: 70mA/channel into 150Ω
- Minimum Load Impedance: 32 Ohms/channel
Power Supply:
- Type: External with locking mini-XLR connector
- Input Voltage: 100-240v 50/60Hz
- Output Voltage: +/-15V; 500mA
General:
- Dimensions: 320 x 219 x 106 mm
- Weight: 2.8Kg
- Product code: R2-DJMIXER