PreSonus Studio 192 Mobile USB Audio Interface

Full Description

Studio Command Center

The Studio 192 Mobile is designed to be a portable hub for any project or professional studio. The on board Talkback mic can be routed to any mix. On board Dim and Mono options let you take control of your Main mix. Listen to any mix from either headphone amp. Use the six balanced outputs for monitor mixing, speaker switching, or both, depending on how you work. With its flexible software and abundant I/O, the Studio 192 Mobile fits into any recording and production environment.

XMAX Microphone Preamps

The Studio 192 Mobile includes two remote controlled XMAX preamps, each providing high headroom, low noise, wide dynamic range, and extended frequency response. The resulting musicality and transparency provides smooth, solid sonic reproduction.

Studio One Compatibility/Integration

Your audio interface is now an integrated extension of your recording environment. Launch Studio One and you'll find the preamp controls, speaker switching, mono, dim, and talkback functions needed to control your Studio 192 Mobile. Create zero-latency monitor mixes complete with Fat Channel processing without leaving the Studio One mixer. Studio One's exclusive hybrid Fat Channel plug-in runs on both your computer's processor and on your Studio 192 Mobile and switches with a sonically seamless transition. At last, you can punch in while monitoring the same audio between playback and recording.

Fat Channel Processing

Adding just the right amount of effects and processing to a monitor mix can make a huge difference in a musician's ability to experience their performance naturally. To that end, the Studio 192 mobile includes Fat Channel processing on every analog input, plus a stereo reverb and delay. The result is a better performance and ultimately a better recording.

Features

• Ultra low latency, 24-bit, 192 kHz USB 3.0 audio interface (backwards compatible with USB 2.0)
• Simultaneous I/O up to 22 inputs / 26 outputs
• Flawless analog signal path with top-quality 118 dB digital conversion
• Individual stereo main balanced outputs with mono, dim, mute, output metering and level control accessible from front-panel, UC Surface, and Studio One
• On board talkback mic
• One high-volume headphone output for monitoring
• 2 XMAX remote controllable mic preamps with individual 48V Phantom Power switching and 85 dB gain range.
• 2 instrument inputs, available via dual-purpose front-panel combo jacks
• 2 balanced line level direct to ADC inputs, available via rear-panel jacks
• 4 Balanced TRS 1/4" outputs for monitor mixing and speaker switching
• ADAT / Dual SMUX Optical inputs/outputs: 16x16 channels at 44.1 or 48 kHz; 8x8 channel at 88.2 or 96 kHz
• Stereo S/PDIF coaxial input and Output
• BNC Wordclock input and output with low-jitter clocking
• Zero latency monitoring with award-winning StudioLive Fat Channel processing on every analog input.
• Total integration with Studio One® for multitrack music production
• UC Surface monitor mix control software with quick, intuitive access to all mixing and monitoring functions.
• Compatible with most music software for Mac or PC.
• USB 3.0 compatible
• Road-rugged construction with all-metal chassis and metal knobs
• Compact rack-mountable design

Specifications

Microphone Preamp

• Type: XLR Female (via Combo), Balanced Remote
• Maximum Input level: +12 dBu, +/-0.5 dB
• Gain Control Range: 85 dB, +/-1 dB
• Frequency Response: 10 Hz to 40 kHz, +/-0.2 dB
• Dynamic Range (min. gain, a-wtd): > 110 dB
• Dynamic Range (mid. Gain, unwtd): > 105 dB
• THD+N: Input Impedance: 1600 Ohms
• EIN: Common Mode Rejection Ratio: > 55 dB
• Phantom Power: +48 V

Instrument Inputs

• Type: 1/4" TS Female (via Combo), Unbalanced
• Maximum Input Level: +16 dBu +/-0.5 dB
• Gain Control Range: 85 dB, +/-1 dB
• Frequency Response: 20 Hz to 20 kHz, +/-0.2 dB
• Dynamic Range (min. gain, a-wtd): > 110 dB dB
• Dynamic Range (mid. gain, a-wtd): > 105 dB
• THD+N: Input Impedance: > 1 M Ohms
• Crosstalk: -80 dB

Line Inputs

• Type: 1/4" TRS Female, Balanced
• Maximum Input Level: + 18 dBu, +/-0.5 dB
• Frequency Response: 20 Hz to 20 kHz, +/-0.2 dB
• Dynamic Range (min. gain, a-wtd): > 114 dB
• Dynamic Range (mid. gain, a-wtd): > 105 dB
• THD+N: Input Impedance: 10 k Ohms
• Crosstalk: -80 dB

Main and Line Outputs

• Type (Line Outputs): 1/4" TRS Female, Impedance Balanced
• Type (Main Outputs): XLR Male, Impedance Balanced
• Maximum Output Level: +18 dBu, +/-0.5 dB
• Frequency Response: 20 Hz to 20 kHz, +/-0.2 dB
• Dynamic Range (a-wtd): > 112 dB
• THD+N: Output Impedance: 51 Ohms
• Crosstalk: -80 dB

Headphone Outputs

• Type: 1/4" TRS Female, Stereo, Unbalanced
• Maximum Output Level: 150 mW/channel @ 60 Ohms
• Frequency Response: 20 Hz to 20 kHz, +/-0.3 dB
• Dynamic Range: > 103 dB
• THD+N: Crosstalk: -80 dB

Digital Audio

• Host Interface: USB 3.0 (backwards compatible to USB 2.0)
• ADC Dynamic Range (A-wtd, 48 kHz): 118 dB
• DAC Dynamic Range (A-wtd, 48 kHz): 118 dB
• Bit Depth: 24 bits
• Internally Supported Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
• ADAT Optical I/O: ADAT/SMUX II formats supported [16x16 (44.1/48 kHz), 8x8 (88.2/96 kHz)]
• S/PDIF I/O: RCA female connections, supported up to 96 kHz
• Word Clock I/O: BNC connector, 4.5 Vpp @75Ohms load