DISC Roland M200I 32-Channel Live Digital Mixing Console

Full Description

Reliable Performance

By incorporating the iPad, the M200i can be operated in a variety of styles to fit any situation. Sound checks can be performed remotely from the stage or any location/seat in the room using the iPad. The iPad functions as a large touch screen display. Use the iPad for intuitive control of effects and other graphical manipulation. At the same time, all operations can still be performed at the console using the built-in display and dedicated knobs and buttons.

Premium Head Amp Circuit

16 inputs are equipped with a discretely designed high-grade microphone preamp circuit. The full digital control specification allows for instant saving and recalling of all parameters such as input gain, padding, and phantom power. An externally connected Digital Snake is fully controlled remotely.

Extensive EQ Options

Four 31-band graphic EQs are included, which are indispensable for live venues. Used together with signal delay on the input channel and output bus, detailed sound adjustments can be easily performed with the M200i. In a venue where more detailed sound correction is required, eight more 31-band graphic EQs can be used by selecting the graphic EQ from the four multi-effects. A gate/expander, compressor and 4-band parametric EQ are available on all 32 channels. The basics of any mix starts with good channel processing and the M200i has it covered. The Main/8AUX/4Matrix output buses are all equipped with a compressor, 4-band parametric EQ, limiter, and delay.

USB Memory

Any two of the Main/8AUX/4Matrix outputs can be recorded as a 16-bit, uncompressed WAV file by inserting a USB memory stick in the back panel. WAV files stored in USB memory can be also be played from any input channel. In addition, the USB memory can be used for saving/loading configuration files on the M200i.

Specifications

Dimensions

• Width: 491mm
• Depth: 490mm
• Height: 198mm
• Weight: 9.8KG

Processing

• Channels: 32
• Busses: Main L/R, 8 Aux, 4 Matrix
• Inputs: 24
• Outputs: 14
• AD/DA Conversion: 24-Bit
• Sample Rate: 48.0 kHz or 44.1 kHz
• Console Latency: 2.0mS
• Network Latency: 2.5mS

Connectors

• Console Input Jacks 1 to 16: XLR-3-31 Type (Balanced with Phantom Power)
• Console Input Jacks 17 to 22: 1/4 Inch Phone Type (Balanced)
• Console Input Jacks 23 to 24: RCA Phono Type
• Assignable Output Jacks 1 to 6: XLR-3-32
• Assignable Output Jacks 7 to 10: 1/4 Inch Phone Type (Balanced)
• Phones Jack: Stereo 1/4 Inch Phone Type, Miniature Phone Type
• Main Output Jacks L and R: XLR-3-32 Type (Balanced)
• AES/EBU Out Jacks: XLR-3-32 type (110 Ohm Balanced)
• REAC Port: RJ-45 EtherCon Type
• RS-232C Connector: 9-Pin D-Sub DIN Type
• USB Memory Port: USB Type A
• SB WLAN Adaptor Port: USB Type A
• USB Computer Port: USB Type B
• LAN Port: RJ45 Type
• DOC Cable Port: 10-Pin Mini DIN Type
• DOC Cable Port: 10-Pin Mini DIN Type DC IN Jack

Input/Output Characteristics

• Frequency Response
  • Assignable Output Jacks 1 to 10: -2 dB / +0 dB (20kOhms Load, +4 dBu, typ.)
  • Main Output Jacks L, R: -2 dB / +0 dB (20kOhms Load, +4 dBu, typ.)
  • Phones Jack: -3 dB / +0 dB (40 Ohms Load, 150 mW)
• Total Harmonic Distortion
  • Assignable Output Jacks 1 to 10: 0.05 (+4 dBu)
  • Main Output Jacks L, R: 0.05 (+4 dBu, typ.)
  • Phones Jack: 0.05 (40 Ohms Load, 150 mW, typ.)
• Nominal Input Level
  • Input Jacks 1 to 16: -65 to +4 dBu
  • Input Jacks 17 to 24: -28 to +4 dBu
• Input Impedance
  • Console Input Jacks 1 to 16: 14 kOhms
  • Console Input Jacks 17 to 24: 10 kOhms
• Non Clip Maximum Output Level
  • Assignable Output Jacks 1 to 10: +22 dBu (1 kHz, 10 kOhms Load, typ.)
  • Main Output Jacks 1 to 10: +22 dBu (1 kHz, 10 kOhms Load, typ.)
  • Phones Jacks 1 to 10: 150 mW + 150 mW (1 kHz, 40 Ohms Load, typ.)
• Output Impedance
  • Console Output Jacks 1 to 10: 600 Ohms
  • Main Output Jacks L, R: 600 Ohms
  • Phones Jack: 49 Ohms
• Recommended Load Impedance
  • Console Output Jacks 1 to 10: 10 kOhms or Greater
  • Main Output Jacks L, R: 600 Ohms
  • Phones Jack: 40 Ohms or Greater

General

• Display: 132 x 64 Dots with Backlight
• Current Draw: 3.6 A
• Residual Noise Level: -88 dBu
• Equivalent Input Noise Level: -126dBu
• Nominal Output Level: +4 dBu (Load Impedance of 10 kOhms)