DISC Audio Technica ATW-2110 P1 F Band Headworn Wireless System

Full Description

Improved Model

The new ATW-R2100 receiver benefits from the latest Audio-Technica 1/2 wave antenna technology (depends on the frequency range) to maximise range. The 12VDC bias voltage on both BNC antenna inputs allows operation with the ATW-B80 antenna booster or other active components. With this breakthrough series, Audio-Technica makes easy setup, automatic scanning and other advanced wireless features affordable as never before. Automatic frequency scanning-standard on all 2000 Series wireless receivers-finds and sets the best available channel at the touch of a button. For those using multiple wireless systems simultaneously, the 2000 Series offers another ease-of-use feature: any of its 10 channels may be used together-eliminating confusing frequency groups and other frequency-coordination problems.

Features

• Increased RF power and link stabiility
• Automatic frequency scanning finds an open channel at the touch of a button
• Up to 10 user selectable channels are available
• True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
• Tone Lock squelch function fights interference
• Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF Metering
• Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver

Specifications

OVERALL SYSTEM:

• Operating Frequencies:
  • UHF band

  • 840.000 - 865.000 MHz (F Band)

  • 795.000 - 820.000 MHz (E Band)

• Number of Channels: 10 total
• Frequency Stability: ±0.005 , Phase Lock Loop frequency control
• Modulation Mode: FM
• Normal Deviation: ±5 kHz
• Operating Range: 100 m typical
• Operating Temperature Range: 41° F (5° C) to 113° F (45° C)
• Frequency Response: 100 Hz to 15 kHz

• Receiving System: Dual independent receivers, automatic-switching diversity
• Image Rejection: 55 dB nominal, 50 dB minimum
• Signal-to-noise Ratio: >100 dB at 40 kHz deviation (A-weighted), maximum modulation 40 kHz
• Total Harmonic Distortion:
• Sensitivity: 20 dBµV (S/N 60 dB at 5 kHz deviation, IEC-weighted)
• Audio Output: Unbalanced: 25 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
• Balanced: 12.5 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
• Output Connectors: Unbalanced: 1/4" TS ("mono") phone jack
• Balanced: XLRM-type
• Dimensions: 8.27" (210.0 mm) W x 1.73" (44.0 mm) Hx 6.39" (162.2 mm) D
• Accessories Included: Two flexible UHF antennas, rack-mount adapters, AC adapter

Terminated with locking 4-pin connector for A-T UniPak body-pack wireless transmitters. 55" (1.4 m) cable. Includes windscreen.

• Element: Dynamic
• Polar Pattern: Hypercardioid
• Frequency Response: 200-18,000 Hz
• Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa
• Impedance: 600 ohms
• Cable: 55" (1.4 m) cable
• Connector: Locking 4-pin connector for A-T UniPak wireless systems