DISC Alto APX1000 Two Channel Digital Power Amp

Full Description

View Full Description

The APX1000 delivers continuous, clean, stereo power to any live performance. Whether you are a sound contractor, gigging musician or live sound engineer, you need consistently clean power from your power amplifiers and the APX1000 brings it to every performance. The APX1000 provides a continuous 2 x 250W at 8ohms, or 2 x 500W at 4 ohms. In bridged mono mode, the APX1000 pumps out 1000 crystal-clear watts of power. Weighing in at only 12.1 lbs., the APX1000 goes into venues with amazing ease and convenience whether used in a permanent installation or portable application. The incredible power-to-weight ratio and performance quality of the APX 1000 means you'll get solid Class D power without breaking your back or your wallet.

Things can sometimes move at light speed on the stage. Connecting an amp should never slow you down. Balanced combo 1/4" XLR, inputs, "Touch-proof" binding posts and speak-on jacks make connecting the APX1000 a snap at any gig, so you never lose precious time getting things going. Once installed, the APX1000's level and clip indicators to keep you informed of performance levels at a glance. Experience the APX1000 for yourself, or check out the APX1500 for installations and gigs requiring a little more power.

The APX1000 amplifier supplies massive power with plenty of headroom to drive any passive speaker. The APX1000 also contains low-noise cooling fans to prevent overheating and high-current toroidal transformers for the lowest possible noise floor.

Features / Specifications:

• 2-Channel Digital Power Amplifier
• Continuous 2 x 400 Watt power at 4 Ohms; 2 x 250W at 8 Ohms; 1000W at 8 Ohms Bridged;
• Switchable Class D power option, low-pass filter and balanced combo input jacks

Power Specifications:

• Power Continuous @ 0.5 THD 4 Ohms 390Wx2
• Both channels driven 8 Ohms 250Wx2 Power EIAJ@ 1 THD 4 Ohms 500Wx2
• Both channels driven 8 Ohms 270Wx2
• Bridge Mono Mode 8 Ohms 1000Wx1
• 20Hz-20kHz 16 Ohms 520Wx1

Electrical Specifications:

• Input Sensitivity: 1.0V
• Input Impedance: 10 K Unbalanced
• Frequency Response: (at 10dB below rated output power) 20 Hz~25 KHz (+0/-3 dB)
• Voltage Gain: 32 dB
• Distortion: (SMPTE-1M) <0.5
• S/N Ratio: >110 dB

General Specifications:

• Protections: ON/OFF, muting,DC-fault load groundind reay.internal fault fuses mode selector.
• Controls Front: AC switch,Voltage selector.
• Controls Rear: Low pass filter, mode selector.
• Signal Indicators: 2 green LED CLIP: 2 red LED
• Power Indicators: 1 Blue LED PROTECTION: 1 red LED
• Input Connectors: Balanced combo
• Output: "Touch-proof" binding posts and speak-on jacks.
• Power Supply: Available for 100V/110-127 V or 210 240 V AC, 50/60 Hz
• Dimensions (WxLxH): 483mm x 285mm x 88.8mm