DigiTech DL-8 Delay/Looper Guitar Pedal Overview
DL-8 Delay/Looper presents a variety of loops and delays. Augment your performances by dialing in and fine-tuning your favorite delays (from 150 milliseconds to 8 seconds) and loops: Reverse, Modulated, Analog, Slapback, Lo Fi, Tape, and Loop. As with all HardWire pedals, the DL-8 is crafted from premium all-metal components to perform night after night, tour after tour.
Click on the links below to Download MP3 demos of the DigiTech DL-8 Delay/Looper Guitar Pedal:
Product Ref: 14228
Full Description
View Full DescriptionFeatures:
- Delay Types - Digital, 0.5 Seconds - 150 ms to 500 ms, (milliseconds), 1 Second - 500 ms to 1 sec, 2 Seconds - 1 sec to 2 sec, 8 Seconds - 2 sec to 8 sec.
- Reverse
- Modulated - chorused delay
- Analog - vintage bucket brigade analog delay
- Slapback - 80 ms to 150 ms
- LoFi - low-fidelity delay
- Tape - classic tube tape echo
- Loop - infinite stereo loops up to 20 sec
- Tails On/Off Switch - When on, delay tails are not cut off in bypass
- True Bypass circuitry - preserves your tone in bypass
- Constant high-voltage operation - for tonal quality and noise reduction
True Bypass. HardWire pedals modify your guitar tone only when you want. HardWire pedals add pure effects when they're on and don't add noise when they're off - truly the best of both worlds. And if you happen to lose power to HardWire pedals in the middle of a performance, you can keep playing because HardWire pedals switch to True Bypass mode until power is restored.
Higher Voltage. HardWire pedals preserve guitar tone because they operate at a significantly higher voltage than your standard pedals. HardWire pedals get the most out of hot guitar pickups and perform flawlessly in the high voltage environment of an amplifier effects loop.
Constant Voltage. HardWire pedals guarantee constant effects performance throughout the life of the battery and prevent tone loss because they operate at a steady voltage - independent of decaying battery voltage.
Tourworthy. HardWire pedals are designed for the touring musician. Unique Stomplock guards prevent controls from being kicked and your tone from being changed. Each HardWire pedal includes custom-cut Velcro® pads to fasten it to a pedalboard and green gaffer tape for the actuator label and see the pedal in the most adverse stage lighting conditions.
Inputs/Outputs
- Inputs: Separate Left and Right ¼" Unbalanced (Tip-Sleeve)
- Input Impedance: 1 MOhms
- Outputs: Separate Left and Right ¼" Unbalanced (Tip-Sleeve)
Power
- UK: 240 VAC, 50 Hz Adapter: PS200R - 240
- Power Input: 9 VDC
- Power Consumption: 610mW
- Battery Type: Single 9 VDC
- Battery Life: 5.25 Hours
General
- Dimensions: 4" Width x 5.5" Length x 2.6" Height
- Weight: 1.3 lbs
| Reviews of our service
View all
