Unsupported Browser
The web browser that you are currently using is no longer supported, and as such features of this website may not work as expected. We advise you to update to a currently supported browser (such as Chrome, Edge, or Firefox) to improve your security, speed, and overall experience.
Key Features
Nothing can match the well-played look and feel of a favorite SG electric guitar from the 1960s or 70s except todays Gibson SG Special Faded electric guitar. The Worn finish make the Gibson SG Special Faded guitars feel like old friends, while humbucking pickups bring the SG Special to a level of performance the originals never had.
Product Ref: 13893
Clean Bridge:
Clean Neck:
Dirty Bridge:
Dirty Neck:
Gibson released the SG in 1961 as the replacement for the Les Paul! Fortunately Gibson realised that the SG was appealing to a totally different guitar player & they re-introduced the Les Paul in 1968 to run along side the SG. The SG Standard is made from solid mahogany but uses a thinner slab body design & therefore it's lighter than a Les Paul. It's still got plenty of balls, as it's loaded with 490R & 498T Alnico Humbuckers - perfect for that classic rock growl that we all associate with bands like AC/DC. The SG Standard is a real looker too - the most classic colours are the Cherry Red & the Ebony Black. We always think the word "Standard" some how under sells both the SG & the Les Paul. These guitars are beautifully made & highly desirable instruments. The SG Standard features a bound neck, trapezoid inlays
50s Rounded Neck Profile
No guitar neck profiles are more distinguishable than the neck profiles employed on the Gibson models of today. The more traditional 50s neck profile on the SG Special is the thicker, rounder profile, emulating the neck shapes found on the iconic 1958 and 1959 Les Paul Standards. The neck is machined in Gibson's rough mill using wood shapers to make the initial cuts. But once the fingerboard gets glued on, the rest - including the final sanding - is done by hand. That means there are no two necks with the exact same dimensions. So while it still has the basic characteristics of its respective profile, each neck will be slightly different, with a distinct but traditional feel.
Dot Inlays
Over the years, the classic dot inlay has been one of the more traditional features of many Gibson models, including the SG. A figured, swirl acrylic gives these inlays that classic 'pearl' look. They are inserted into the fingerboard using a process that eliminates gaps and doesn't require the use of fillers.
Gibson's 490 (R) Rhythm and (T) Treble Pickup
The mid to late 1960s saw the emergence of a very different type of music coming from the clubs of England. It was an interpretation of the blues that hadnt been heard before, and it was much harder, more rocking, and definitely louder than anything else before it. As such, this new genre's players were demanding more powerful amplifiers with increased volume outputs to satisfy their sonic explorations. This led to a call for a more versatile pickup that could split coils through a push/pull knob, and prevent microphonic feedback from occurring when the volumes were turned up to maximum levels. Gibson answered this call with the introduction of the revolutionary 490T and 490R pickups ('T' for treble, and 'R' for rhythm). The 490R is a humbucker with the tonal characteristics of an original PAF, with a slight increase in upper mid-range response. The 490T bridge pickup is calibrated to match the 490R, with pole pieces aligned a little further apart to accommodate the spacing of the strings at the bridge, which is different than the spacing of the strings at the neck.
Solid Mahogany Body
Probably the most central of all the SG Special's features is its solid mahogany body - lightweight, strong, with a thick, warm tone. The mahogany goes through the same rigorous selection process as all of Gibson's woods, and is personally inspected and qualified by Gibsons team of skilled wood experts before it enters the Gibson factories. Inside the Gibson factories, humidity is maintained at 45 percent, and the temperature at 70 degrees. This ensures all woods are dried to a level of 'equilibrium', where the moisture content does not change during the manufacturing process. This guarantees tight-fitting joints and no expansion, in addition to reducing the weight. It also helps with improving the wood's machinability and finishing properties. Consistent moisture content means that a Gibson guitar will respond evenly to temperature and humidity changes long after it leaves the factory.
22-Fret Rosewood Fingerboard
Rosewood has always graced the fingerboards of the world's finest stringed instruments, including many of today's Gibsons. The fingerboard on the Gibson SG Special is constructed from the highest grade rosewood on the planet. The rosewood is personally inspected and qualified by Gibson's team of skilled wood experts before it enters the Gibson factories to be fitted onto the necks of the SGs. The resilience of this dense and durable wood makes these fingerboards extremely balanced and stable, and gives each chord and note unparalleled clarity and bite. The 12-inch radius of the fingerboard provides smooth note bending capabilities and eliminates 'dead' or 'choked out' notes, common occurrences on fingerboards with lesser radiuses.
Body
Neck
Electronics
Fingerboard
Equipped with Gibson Britewires 0.10 - 0.46